Stihl MS 650 Manual page 99

: Inspect the generator and poles
(arrow) for cracks or other
damage. If damage is found,
replace the generator.
: Inspect the magnet ring (arrow) in
the flywheel for cracks or other
damage. If damage is found,
replace the flywheel.
Reassemble in the reverse
sequence.
98
2
2
2
: Place the generator in position
with the connecting wires (1)
facing the crankcase.
: Position the generator wire in the
crankcase recess (arrow).
: Push the guide into the
crankcase bore.
– Install screws (2) with Loctite 242
– b 17
: Tighten down the screws firmly –
b 3.5
Reassemble all other parts in the
reverse sequence.
– Positioning the wiring – b 15.2
1
MS 650, MS 660