Electric Handle Heating; Starting / Stopping The Engine - Stihl MS 441 C-M Instruction Manual

English
Mounting the cover plate (special
accessory)
N Insert cover plate (1) with both tabs
(arrows) and fasten with screws (2)
When the mounting kit is used, the slide
must be in the winter position.
If engine trouble occurs, first check
whether use of the cover plate is
necessary.
22

Electric Handle Heating

Switching on the handle heating
system (depending on equipment
version)
N Set switch to F – to switch off, return
switch to the 0 position
Overheating during continuous use is
impossible. The heating system is
maintenance-free.
Starting / Stopping the
Engine
Positions of the Master Control lever
STOP
0
Stop 0 – engine off – ignition is switched
off
Operating position F – engine is
running or can start
Start } – this position is for starting the
engine
Adjusting the Master Control lever
To adjust the Master Control lever from
the operating position F to Start },
press and hold down the throttle trigger
lockout and throttle trigger
simultaneously – set Master Control
MS 441 C-M