Fuel Hose In Tank - Stihl MS 650 Manual

1
Pickup Body
: Use hook (2) 5910 893 8800 to
pull the pickup body (1) out of the
fuel tank.
Do not stretch the fuel hose too
much during this operation.
– Pull the pickup body off the fuel
hose.
Note:
Take care not the damage the fuel
hose. Do not use pointed tools.
– Replace the pickup body.
Reassemble in the reverse
sequence.
MS 650, MS 660
12.8 Fuel Hose
1
– Remove the air filter – b 12.1
– Remove filter base – b 12.1
: Pull the fuel hose (1) off the
carburetor.
1
: Carefully pry the fuel hose out of
the grommet in the tank.
12.9

Fuel Hose in Tank

1
– Remove the carburetor –
b 12.2.1
– Remove the pickup body (1) –
b 12.7
– Remove the carburetor housing.
: Pull the grommet (arrow) with
hose out of the tank.
– Pull out the fuel hose.
Reassemble in the reverse
sequence.
When installing, make sure the flat
side of the grommet points towards
the cylinder.
Before installing, lubricate outside
diameter of grommet with Press
Fluid OH 723 0781 957 9000 or
two-stroke oil.
– Test tank for leaks – b 12.6
87