Tank Housing; Annular Buffer At Top Of Tank Housing - Stihl MS 650 Manual

1
Removing at flywheel side
: Pry the plugs (arrows) out of the
annular buffers.
1
1
– Take the screws out of the
annular buffers.
: Pry the annular buffers (1) out of
the crankcase.
Note:
Coat annular buffers with STIHL
Press Fluid before installing.
64
1
2
Installing at clutch side
: Push the annular buffer (1) home
from outside so that its groove
engages the housing rib (2).
1
Installing at flywheel side
: Push the annular buffer home
from outside so that its groove (1)
engages the housing rib (2).
Reassemble all other parts in the
reverse sequence.
9.2
1
– Remove the crankcase from the
tank housing – b 12.10
: Take out the screws (1).
: Remove the annular buffer (2).
Reassemble in the reverse
sequence.
2
Annular Buffer at top of

Tank Housing

1
MS 650, MS 660
2