TRENDnet TEW-840APBO User Manual page 32

14 dbi wifi ac867 outdoor poe preconfigured point-to-point bridge kit
Hide thumbs Also See for TEW-840APBO:
Table of Contents

Advertisement

TRENDnet User's Guide
LAN Information IPv6
IP Address – Displays the IPv6 address assigned to the access point. This can be
modified under the Network > Basic section.
Link-Local Address – Displays the current Link-Local address and prefix length
assigned to your access point.
Gateway – Displays the current gateway address assigned to your access point.
Primary DNS – Displays the primary Domain Name Server (DNS) assigned to
your access point.
Secondary DNS – Displays the secondary Domain Name Server (DNS) assigned
to your access point.
Wireless LAN Information – 5GHz
Operation Mode – Displays the operation mode that the access point is
currently set.
Wireless Mode – Displays the IEEE 802.11 protocol the access point's wireless
radio is broadcasting on.
Channel Bandwidth – Displays the bandwidth (in MHz) that the access point's
radio is using
Channel – Displays the channel that the 5GHz radio is using.
The table below displays the Profile #, SSID, Security, VID, and 802.1Q status of
all radios currently being broadcasted.
© Copyright 2019 TRENDnet. All Rights Reserved.
Statistics
Displays the data usage (RX, TX) of each interface, and their respective SSIDs.
3. Click Refresh at the bottom of the page to refresh the page.
TEW-840APBO / TEW-840APBO2K
30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-840apbo2k

Table of Contents