Table of Contents
Advertisement
TRENDnet User's Guide
19. Click Configuration for Channel.
Within the new popup window, please select and take note of which channel
this access point is set to broadcast at then click Save. Default: Ch. 48 (note,
the greyed out channel is the currently selected channel).
20. Scroll down on the previous page (Wireless tab under the Networking category)
and identify the Wireless Settings – 5GHz section, click on Edit to configure the
WDS AP settings. A new window will open for wireless settings configuration.
© Copyright 2019 TRENDnet. All Rights Reserved.
Within the new popup window, please select and take note of the Security
Mode, Encryption, and Passphrase then click Save.
Default: WPA2-PSK, AES, <predefined>
Note: Certain bowers and popup blockers may block the configuration popup windows.
Check to make sure there is nothing blocking the window from appearing if you do not
see it.
21. Scroll down on the previous page (Wireless tab under the Networking category)
and click Save.
MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE
Click Changes
Apply
.
Click Apply
TEW-840APBO / TEW-840APBO2K
APPLIED
from the top right menu bar, and click
OR
on the bottom right of any page:
12
Hide quick links:
Advertisement
Table of Contents
