1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Access Point
  5. TEW-823DAP V2
  6. User manual

TRENDnet TEW-823DAP V2 User Manual

Indoor wireless access point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cover Page
TRENDnet User's Guide

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TEW-823DAP V2

Summary of Contents for TRENDnet TEW-823DAP V2

  • Page 1 Cover Page TRENDnet User’s Guide...

  • Page 2: Table Of Contents

    Advanced configuration ..............16 Repeater ..................28 Access the management page ..................16 Basic ..........................28 Operating Modes ......................16 Scan for wireless networks ..................29 Access Point .................. 17 Advanced wireless settings ..................30 © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 3 Check system information ................... 34 Check connected wireless clients ................35 System Log ........................35 Hardware Features and Specifications ................ 36 Indoor Access Point Software Specifications ............... 39 Troubleshooting ................40 Appendix ..................41 © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 4: Product Overview

    Product Overview Features TEW-823DAP TRENDnet’s high-performance AC1300 Dual Band Indoor Wireless PoE Access Point, model TEW-823DAP, supports Access Point (AP) and Repeater modes. This wireless indoor access point generates concurrent 867Mbps WiFi AC and 400Mbps WiFi N networks. MU-MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance when multiple devices access the network.

  • Page 5: Product Hardware Features

    *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. • PWR: This indicator turns blue when the device is powered. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 6: Application Diagram

    • Reset button: Use a sharp tool to press and hold this button for 15 seconds to reset the access point. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 7: Product Overview

    Features TEW-923DAP TRENDnet’s high-performance AX3000 Dual Band WiFi 6 PoE+ Access Point, model TEW- 923DAP, features two concurrent WiFi bands to maximize networking speeds with the latest WiFi 6 technology. The two separate high-speed WiFi 6 bands provide speeds up to 2402Mbps on the 5GHz band and 573Mbps on the 2.4GHz band.

  • Page 8: Product Hardware Features

    Wall / Ceiling mounting plate *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 9: Product Overview

    • 1.64 ft. (0.5 m) network cable • Quick Installation Guide • Mounting plates If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 10: Features

    WiFi Traffic Shaping Manage traffic allocation on the WiFi 6 access point per SSID for each band separately TRENDnet’s high-performance AX5400 Dual Band WiFi 6 PoE+ Access Point, model TEW- 925DAP, features two concurrent WiFi bands to maximize networking speeds with the latest WiFi 6 technology.

  • Page 11: Product Hardware Features

    • Reset button: Use a sharp tool to press and hold this button for 15 seconds to reset the access point. • PWR: This indicator turns blue when the device is powered. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 12: Getting Started

    (SSID) and WiFi Password. You can find your device's SSID and WiFi password on the white labels located on the device. Use this information to connect to the access point. Note: The white label below may be different than the label included with your access point. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 13: Steps To Improve Wireless Connectivity

    Connect wireless devices to your access point Steps to improve wireless connectivity A variety of wireless network devices can connect to your wireless network such as: • Gaming Consoles © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 14: Configuration

    2. Enter the default user name and password and then click Login. You can find your device's SSID and WiFi password on the white labels located on the device. Use this information to connect to the access point. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 15: Wireless Networking And Security

    Setting up wireless security is very important. Leaving your wireless network open and encryption standard. If you find that one of your wireless network devices does not unsecure could expose your entire network and personal files to outsiders. TRENDnet support WPA3 encryption, then set your router to either WPA2 or WPA encryption.

  • Page 16: Secure Your Wireless Network

    • IP Address: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250) • Port: Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812 which is typical default RADIUS port. © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 17 Indoor Wireless Access Points TRENDnet User’s Guide • Shared Secret: Enter the shared secret used to authorize your router with your RADIUS server. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 18: Connect Wireless Devices Using Wps

    • WPS SSID: Displays the SSID of the WPS network • WPS Security Mode: Display the security mode of the WPS network • WPS Key: Displays the security password • AP PIN: Display the WPS PIN information. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 19: Advanced Configuration

    2. Enter the default user name and password and then click Login. You can find your 2. Click on System and Operation Mode. device's SSID and WiFi password on the white labels located on the device. Use this information to connect to the access point. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 20: Access Point

    Make sure all of the settings of the wireless interface matches to your root or connecting wireless access points, same SSID, channel and wireless encryption settings. © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 21 To manually set the channel on which the router will broadcast, Note: This wireless mode is only available with TEW-923DAP and TEW-925DAP. click the drop-down list and select the desired Channel for wireless communication. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 22: Wireless Profile

    5. Review the wireless settings, click Save and Apply/Discard Changes when finished. 3. Review the settings and click Apply and Save button to save settings. • SSID: Enter the wireless network name (SSID) to assign to the selected wireless profile © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 23: Wireless Mac Filter (Tew-923Dap / Tew-925Dap)

    Wireless MAC Filter (TEW-923DAP / TEW-925DAP) • MAC: List of all MAC addresses Wireless (2.4GHz or 5GHz) > Wireless MAC Filter • Delete: Click to remove the selected MAC address from the MAC Filter List © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 24: Band Steering

    Note: This function can only work with 802.11k capable wireless client described above or similar, it is recommended to keep your router IP address settings as devices. Please check your device specifications with your manufacturer for details. default. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 25: Reboot Schedule (Tew-823Dap)

    • Time: Select the time from the drop down menu. 4. After clicking Add, click on the Save button located on the top right section to save the settings. Schedule (TEW-923DAP/TEW-925DAP) System > Schedule © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 26: Configure Spanning Tree

    1. Log into your management page (see “Access the management page” on page 13). 2. Click on the System tab and click Spanning Tree Settings. 3. Review the settings and click Save to save changes. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 27: Daylight Saving Time

    2. Click Apply then click the Save button on the top-right when finished. • Status: Select Enabled from the drop down menu to enable VLAN feature • VID: Enter the VID to assign on the selected wireless network • SSID: Displays the available SSID © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 28: Wireless Bandwidth Control

    • Download MAX: Enter your network’s inbound traffic limit for the selected wireless SSID • Upload Limit: Enter your network’s outbound traffic limit for the selected wireless SSID 4. Click Apply then click the Save button on the top-right when finished. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 29: Ssh Management

    3. Select Enabled and click Apply to save settings. 4. Click Apply then click the Save button on the top-right when finished. 4. Click Apply then click the Save button on the top-right when finished. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 30: Upnp

    Current Gateway IP to have your access point automatically find the gateway on your network. Delay Between Timeouts: Set the time between each ping • 4. Click Apply then click the Save button on the top-right when finished. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 31: Repeater

    5GHz when Repeater mode is selected. configure and click Wireless Network. 1. Log into your management page (see “Access the management page” on page 13). 2. Click on System, and select Operation Mode. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 32: Scan For Wireless Networks

    You will then need to select and enter the • Pre-Shared Key: Enter the password for the selected SSID wireless security. 6. Click Apply then click the Save button on the top-right when finished. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 33: Advanced Wireless Settings

    • Max Client: Enter the amount of clients to allow 4. Click Apply then click the Save button on the top-right when finished. 3. Review the settings and click Save to save settings. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 34: Maintenance & Monitoring

    Before you reset to defaults, if Timeout possible, you should backup your access point’s configuration first. Management > Timeout There are two methods that can be used to reset your access point to factory defaults. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 35: Backup And Restore Your Configuration Settings

    2. Click on the Management tab and click Backup/Restore Settings. 5. Depending on your web browser settings, you may be prompted to save a file (specify the location) or the file may be downloaded automatically to the web browser © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 36: Upgrade Your Firmware

    Management > Upload Firmware TRENDnet may periodically release firmware upgrades that may add features or fix Management > Log problems associated with your TRENDnet access point model and version. To check if 1. Log into your management page (see “Access the management page”...

  • Page 37: Check System Information

    • Default Gateway: Displays the default gateway of the device 2. Click on the Status tab and click Main. • Primary/Secondary DNS: Displays the DNS IP address of the device 3. Review the device information. Wireless (Both 2.4GHz and 5 GHz) System © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 38: Check Connected Wireless Clients

    Device Name: Displays the name of the client that is connected to the selected • band • MAC Address: Displays the MAC address of the client that is connected to the access point © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 39: Hardware Features And Specifications

    802.11n (5GHz.): FCC: 27 dBm (max.) 21dBm (max.) dBm (max.) 802.11ac: FCC: 28.5 dBm (max.) / CE: 21 dBm 802.11ac (5GHz.): FCC: 23 dBm (max.) / CE: 23 802.11ac (5GHz.): FCC: 27 dBm (max.) (max.) dBm (max.) © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 40 160 x 160 x 30mm (6.3 x 6.3 x 1.18 in.) 160 x 160 x 30mm (6.3 x 6.3 x 1.18in.) Weight 188g (6.7 oz.) 380g (13.4 oz.) 600g (21.16 oz.) Warranty 3 year © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 41 Indoor Wireless Access Points TRENDnet User’s Guide TEW-823DAP TEW-923DAP TEW-925DAP Quick Installation Guide Package Content Network cable (0.5m / 1.64 ft.) Mounting plates © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 42: Indoor Access Point Software Specifications

    300Mbps 802.11n wireless adapter. Multi-User MIMO (MU-MIMO) requires the use of multiple MU-MIMO enabled wireless adapters. **Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 43: Troubleshooting

    Note: If you are experiencing difficulties, please contact your computer or operating click on Wireless. system manufacturer for assistance. 5. Please see “Steps to improve wireless connectivity” on page 8 if you continue to have wireless connectivity problems. © Copyright 2023 TRENDnet. All Rights Reserved.

  • Page 44: Appendix

    2. In the Network Preference window, next to "Show:", select Network Status. You'll see select the TCP/IP tab. your network status and your IP address settings displayed. In MAC OS 10.5/10.6, in the left column, select Ethernet. e. Configure TCP/IP to use DHCP. © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 45 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 46 This equipment has been tested and found to comply with the limits for a Class B digital TRENDnet hereby declare that the product is in compliance with the essential requirements device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable and other relevant provisions under our sole responsibility.
  • Page 47 20cm entre le radiateur et votre corps. Country Code selection feature to be disabled for products marketed to the US/CANADA Operation of this device is restricted to indoor use only © Copyright 2023 TRENDnet. All Rights Reserved.
  • Page 48 An RMA number is required in order to initiate warranty service support the event that the RMA unit needs to be replaced, TRENDnet may replace it with a for all TRENDnet products. Products that are sent to TRENDnet for RMA service must refurbished product of the same or comparable model.
  • Page 49 OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND evidence of the original purchaser's date of purchase. Replacement products may be OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY refurbished or contain refurbished materials. If TRENDnet, by its sole determination, is...

This manual is also suitable for:

Tew-923dapTew-925dap

Table of Contents