Tew-840Apbo #2 - TRENDnet TEW-840APBO User Manual

TRENDnet User's Guide

TEW-840APBO #2

When configuring TEW-840APBO #2, repeat all steps up to step 14 in previous section
when configuring TEW-840APBO #1.
Assuming steps 1-14 from previous section....
15. Under the IPv4 Settings section, select Static IP and enter the IP Address
192.168.10.51, Subnet Mask 255.255.255.0, Gateway 192.168.10.1, then click Save
at the bottom of the page.
16. The page should now have two indicators regarding pending changes:

Top right menu of the page:

Bottom right of the page:
Note: Settings configured on the Access Point are not applied until you click apply
changes. In order to minimize time spent waiting for the Access Point to reboot when
applying settings, we recommend configuring all necessary settings and changes prior to
apply & reboot of the device.
© Copyright 2019 TRENDnet. All Rights Reserved.
17. Click on the Wireless tab under Network category in the left hand menu.
18. Select TDMA under Channel Access Mode.
19. Click on the Operation Mode field and in the drop-down list click on WDS Station.
TEW-840APBO / TEW-840APBO2K
13