TRENDnet TEW-840APBO User Manual page 16

TRENDnet User's Guide
20. Click Configuration for Channel.

Within the new popup window, please select the channel which was selected
in when configuring TEW-840APBO #1
channel is the currently selected channel).
21. Scroll down on the previous page (Wireless tab under the Networking category)
and identify the Wireless Settings – 5GHz section, click on Edit to configure the
WDS station settings. A new window will open for wireless settings configuration.
Note: Certain bowers and popup blockers may block the configuration popup windows.
Check to make sure there is nothing blocking the window from appearing if you do not
see it.
© Copyright 2019 TRENDnet. All Rights Reserved.
then click Save. (Note: the greyed out

Within the new popup window, click Device Discovery then select the
correct radio, or manually enter the BSSID MAC and SSID of those in
configured for TEW-840APBO

Additionally, configure the Security Mode, Encryption, and Passphrase to
match those configured for
22. Scroll down on the previous page (Wireless tab under the Networking category)
and click Save.
MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE

Click Changes
Apply .

Click Apply
TEW-840APBO / TEW-840APBO2K
#1.
TEW-840APBO #1 then click Save.
APPLIED
from the top right menu bar, and click
OR
on the bottom right of any page:
14