The low-profile housing design blends into most environments and includes a convenient wall / ceiling mounting plate with cable guard. The TEW-826DAP supports Access Point (AP), Client Bridge, Wireless Distribution System Access Point (WDS AP), WDS Bridge, WDS Station, and Repeater modes...
By default, the access point web management configuration page can be accessed using the URL http://tew-826dap or using the default LAN IP address http://192.168.10.100. At default settings and initial setup, if the access point is connected to a network with a...
TEW-826DAP TRENDnet User’s Guide 3. For your security, each TEW-826DAP comes pre-encrypted with a unique WiFi Basic Setup Name (SSID) and WiFi Password. You can find your device's SSID and WiFi Note: It is strongly recommended to configure the access point first before mounting.
Your access point will prompt you for a user name and password. 2. You can find your device's default SSID and WiFi password on the white labels located on the device. Use this information to connect to the TEW-826DAP access point. Setup Wizard If it is the first-time you are logging into the device, you will automatically be prompted to run through the setup wizard.
If the Authentication Method is left enabled, the through your captive portal page. (e.g. https://www.trendnet.com) users will need to authenticate twice, once with the authentication method defined and ...
Setting up wireless security is very important. Leaving your wireless network open and connection speeds. TRENDnet recommends setting your access point to this unsecure could expose your entire network and personal files to outsiders. TRENDnet encryption standard. If you find that one of your wireless network devices does not...
2. Click on the Management tab and click Backup/Restore Settings. TRENDnet may periodically release firmware upgrades that may add features or fix problems associated with your TRENDnet access point model and version. To check if 3. Click Load Default. If prompted, click Yes or Ok.
3. Depending on your web browser settings, you may be prompted to save a file (specify the location) or the file may be downloaded automatically to the web browser settings default download folder. (Default Filename: TRENDnet IP: Enter the IP address you would like to conduct the ping test EAP_config.bin)
Page 68
This equipment has been tested and found to comply with the limits for a Class B digital TRENDnet hereby declare that the product is in compliance with the essential requirements device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable and other relevant provisions under our sole responsibility.
Page 70
An RMA number is required in order to initiate warranty service support the event that the RMA unit needs to be replaced, TRENDnet may replace it with a for all TRENDnet products. Products that are sent to TRENDnet for RMA service must refurbished product of the same or comparable model.
Page 71
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND evidence of the original purchaser's date of purchase. Replacement products may be OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY refurbished or contain refurbished materials. If TRENDnet, by its sole determination, is...