Tew-840Apbo #1 - TRENDnet TEW-840APBO User Manual

TRENDnet User's Guide

TEW-840APBO #1

1. Using a RJ-45 network cable, connect one end of the cable to the LAN1 (PoE) port
and ensure the cable is lined up with the Cable Guides before closing the cover.
(note: this RJ-45 network cable cannot exceed 60m)
2. Connect the other end of the RJ-45 network cable to the PoE port on the included
PoE injector. (note: this RJ-45 network cable cannot exceed 60m)
3. Using another RJ-45 network cable, connect one end to the LAN port on the
included PoE injector.
4. Connect the other end of the RJ-45 network cable to your computer's Ethernet
port.
5. Attach the power cord to the PoE injector and plug the connected power cord into a
power outlet.
© Copyright 2019 TRENDnet. All Rights Reserved.
6. Confirm the device is powered on through the LED indicators.
7. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.10) and subnet mask of 255.255.255.0.
Note: For information on how to statically assign your IP address, see the Appendix
section.
TEW-840APBO / TEW-840APBO2K
9