TRENDnet User's Guide
7. Confirm the device is powered on through the LED indicators.
Note: Repeat steps 1-7 to power on and connect the second access point.
8. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.10) and subnet mask of 255.255.255.0.
Note: For information on how to statically assign your IP address, see the Appendix
section.
© Copyright 2019 TRENDnet. All Rights Reserved.
9. Using another network cable, connect one end to the LAN port on the included PoE
injector for either the first or second access point.
10. Connect the other end of the network cable to your computer's Ethernet port.
TEW-840APBO / TEW-840APBO2K
20