Install Mounting Plate - Siemens FS720 Mounting & Installation

6.10 Install mounting plate

6.10.1 Install mounting plate
Building Technologies
Fire Safety
The mounting plate FHA2008-A1 is used to hold components that have to be
installed above the periphery board. It is supplied in a disassembled state and in a
separate packaging unit.
Mounting plate FHA2007-A1 is delivered unassembled and must be assembled
prior to installation. The edge protector (included) can be slid onto the respective
edges of the mounting plate to protect the cables.
10 12
11
10 9 8 7
Figure 42: Example of installation of mounting plate FHA2007-A1 in housing (Comfort)
1 Threaded hole in rear panel for spacer
2 Spacers (2 pieces) for fixing the mounting plate
3 Top fixing screw with spring (pre-mounted)
4 Mounting plate
5 Bottom fixing screw with spring (pre-mounted)
6 Hinged bracket
7 Fork head (2 pieces) for mounting the hinge bracket
8 Counternut M 5 (2 pieces)
9 Spacer bolts (2 pieces)
Installing, exchanging and connecting modules
13
6
Install mounting plate
91 | 222
A6V10210390_j_en_--
2015-12-15
6
1
2
3
4
5