Installing, exchanging and connecting modules
6
Shield connection terminal blocks [DE]
86 | 222
Building Technologies
Fire Safety
Mounting steps
1. Fasten the terminal strip (2) using the two screws (3) as follows:
2. Eco and Standard housings: Above the rectangular cable breakout opening on
the right
3. Comfort housing: One terminal strip above each of the rectangular cable
breakout openings
4. Hang the shield connection terminal blocks (1) onto the terminal strip (2) and
fasten them by tightening the knurled screws.
A6V10210390_j_en_--
2015-12-15