Sounder Module; Installation - Siemens FS720 Mounting & Installation

6.24 Sounder module

6.24.1 Installation

Building Technologies
Fire Safety
Sounder module FCI2005-A1 is fitted in the fire control panel. The sounder module
can be screwed flat onto the rear panel or mounting plate or engaged on the DIN
rail by means of the enclosed mounting feet FDCM291.
The following instructions show how the sounder module is mounted onto the DIN
rail.
Figure 101: Installation example: sounder module FCA2005
1 DIN rail
2 Mounting feet FDCM291
3 Sounder module FCA2005-A1
1. Insert the two mounting feet (2) laterally in the sounder module (3). Two
mounting feet must always be fitted together.
2. Push the sounder module (3) with the mounting feet (2) against the DIN rail (1)
until the mounting feet snap into place.
3. Wire up the sounder module according to the pin assignment.
Installing, exchanging and connecting modules
X3
X2
X1
3
6
Sounder module
1
173 | 222
A6V10210390_j_en_--
2015-12-15