Planning; Compatibility Fdnet/C-Net; Fields Of Application; Mounting Site - Siemens FDM223 Technical Manual

Planning

4

Compatibility FDnet/C-NET

4.1 Compatibility FDnet/C-NET

4.2 Fields of application

4.3 Mounting site

4.4 Environmental influences

26 | 54
4 Planning
Compatible with control panels that support the FDnet/C-NET detector line.
Detector line
FDnet
C-NET
X = compatible
– = not compatible
You will find detailed information in the 'List of compatibility'.
See also
2
The manual call points are intended for use in places where a fire can be detected
by people who can manually trigger an alarm.
The manual call points must be installed in easily accessible places at a height of
0.9...1.6 m on an even surface.
Observe the country-specific regulations for the exact mounting height!
If the devices are used in industrial applications, consultation with the project
manager is required, since plastics do not withstand certain environmental
conditions.
The following factors must be taken into consideration:
● Chemicals
● Temperature
● Moisture
Control panel
FC20xx FC72x
X -
– X
Applicable documents [➙ 7]
SIGMASYS AlgoRex
X X
– –
007002_k_en_--