Transformer Installation; Front Plate Assembly; Front Plate Mounting - Siemens FireSeeker FS-100 Installation, Operation And Maintenance Manual

FS-100 Installation & Operation Manual
F. Transformer Installation
1. Place the transformer assembly over the studs on the left side of the enclosure. Mounting the
transformer can be accomplished before mounting the enclosure if desired.
2. Secure the transformer using four #6-32 locking nuts.
3. Plug the transformer assembly into connector P5 on the Main Board.
G. Front Plate Assembly
1. Secure Display Board to Plate Assembly using ten #6-32x1/4" screws.
2. Apply Overlay to Plate Assembly.
H. Front Plate Mounting
1. Plug the Cable Assembly into connector P4 of the Display Board and to connector P1 of the Main
Board.
2. Secure the Front Plate Assembly to backbox using four #8-32 self-tapping screws.
P/N 315-699461
Technical Manuals Online! - http://www.tech-man.com
22