Attaching The Output Elements - Siemens SIMOTICS A-1FV5 Operating Instructions Manual

①
Thread for NDE support
Figure 5-1 Motor support at the NDE
Tightening torques
Table 5- 2 Tightening torques
Motor
1PV513x/ DE
1FV513x
NDE
DE
1FV516x
NDE
Alignment accuracy for coupling output
The maximum permissible concentricity deviation of the shafts of the motor and the driven
machine is 0.05 mm in the diameter.
5.3

Attaching the output elements

Note
Do not subject the motor's shaft and bearings to impact. Do not exceed permissible
cantilever and radial forces.
SIMOTICS A-1FV5/1PV5 synchronous/induction motors
Operating Instructions, 03/2014, 610.45002.40
Screw
M 12
M12 (screw-in depth, 25...30 mm)
M 16
M12 (screw-in depth, 18...20 mm)
5.3 Attaching the output elements
Tightening torque Property class of the
±10 % [Nm]
85
85
190
85
Mounting
screws
8,8
8.8
10.9
8.8
31