Table of Contents
Advertisement
Safety notes
2.1
General safety information
Safety and commissioning information for converter-fed low-voltage three-phase motors
(in accordance with the Low Voltage Directive 2006/95/EC)
All work associated with transporting, connecting, commissioning, and maintaining the
motors must be carried out by qualified, responsible personnel (DIN EN 50110-1;
note IEC 60364).
Failure to follow proper procedures may result in injury or material damage.
The valid national, local and plant/system-specific regulations and requirements must be
carefully observed.
Special versions and construction variants may differ with respect to certain technical
aspects. If in doubt, you are strongly advised to contact the manufacturer specifying the type
designation and serial number (see rating plate) or arrange for any maintenance work to be
carried out by the SIEMENS Service Center.
Vehicles with converter-fed low-voltage three-phase motors must fulfill the protective
requirements of the EMC Directive 2004/108/EC.
The user is responsible for ensuring that installation is carried out properly. The signal and
power cables must be shielded.
The information provided by the converter manufacturer regarding EMC-compliant
installation must be observed.
SIMOTICS A-1FV5/1PV5 synchronous/induction motors
Operating Instructions, 03/2014, 610.45002.40
DANGER
2
9
Advertisement
Table of Contents
