Table of Contents
Advertisement
Description
3.4 Design
3.4
Design
3.4.1
Regulations
The motors comply with the following regulations according to IEC 60034-x/EN 60034-x:
Table 3- 3
Feature
Rated and operation characteristics
Degree of protection
Cooling
Type of construction
Terminal markings
Noise emission
Temperature monitoring
Vibration severity grades
(1)
The three-phase motors comply with the relevant sections of EN 60034 and EN 60204-1.
Three-phase motors comply with Low-Voltage Directive 2006/95/EC. Standard motors
comply with the UL regulations. "UR" is stamped on the rating plate of these motors.
Note
Make sure that your end product is in compliance with all of the applicable legislation!
You must take into account the applicable national, local, and system-specific regulations
and requirements.
3.4.2
Types of construction
The motor has type construction IM B5.
3.4.3
Degree of protection
The motors have degree of protection IP65/IP69K. In order to guarantee the degree of
protection, the drive end flange must be suitably implemented.
18
Regulations that have been applied
(1)
(1)
The degree of protection and type of construction of the motor are stamped on its rating plate.
Standard
IEC/EN 60034-1
IEC/EN 60034-5
IEC/EN 60034-6
IEC/EN 60034-7
IEC/EN 60034-8
IEC/EN 60034-9
IEC/EN 60034-11
IEC/EN 60034-14
SIMOTICS A-1FV5/1PV5 synchronous/induction motors
Operating Instructions, 03/2014, 610.45002.40
Advertisement
Table of Contents
