Table of Contents
Advertisement
Preparing for use
4.1
Shipment and packaging
Checking the delivery for completeness
The drive systems are assembled on an individual basis. Upon receipt of the delivery, check
immediately whether the items delivered are in accordance with the accompanying
documents. Siemens will not accept any claims relating to items missing from the delivery
and which are submitted at a later date.
● Report any apparent transport damage to the delivery agent immediately.
● Report any apparent defects/missing components to the appropriate Siemens office
These safety instructions are part of the scope of supply; keep them in a location where they
can be easily accessed.
The additional rating plate supplied separately with the consignment should be used for
indication of the motor data in the vicinity of the motor.
The rating plate is located in the terminal box.
4.2
Transport and storage
4.2.1
Transport
Use suitable load bearing equipment when transporting and installing the motor. Make sure
that all of the available eyebolts are used during transportation. Country-specific regulations
must be observed.
If the motor is not to be commissioned immediately following delivery, it must be stored in a
dry, dust-free room that is not susceptible to vibration (see "Storage").
Hazards during lifting and transportation!
Devices and tools that are badly designed, unsuitable, or damaged can result in personal
injury and/or material damage.
Lifting devices, industrial trucks, and load bearing equipment must comply with require-
ments. Pay attention to the lifting capacity of the hoisting gear. Do not attach any additional
loads. To hoist the motor, use suitable cable-guidance or spreading equipment (particularly
if the motor is equipped with built-on assemblies). The weight of the motor is specified on
the rating plate.
SIMOTICS A-1FV5/1PV5 synchronous/induction motors
Operating Instructions, 03/2014, 610.45002.40
immediately.
WARNING
4
23
Advertisement
Table of Contents
