Operation; Safety Instructions During Operation - Siemens SIMOTICS A-1FV5 Operating Instructions Manual

Operation

8.1

Safety instructions during operation

Do not remove covers when motor is running
Rotating or live parts are dangerous. Death, serious injury, or material damage can result if
the required covers are removed.
All covers that prevent operators from coming into contact with active or rotating parts,
ensure compliance with the required degree of protection, or ensure proper air guidance
and, in turn, effective cooling must not be opened/removed during operation.
Faults during operation
Deviations from normal operation (e.g. increased power consumption, temperatures or
vibrations, unusual noises or odors, tripping of monitoring devices, etc.) indicate that the
machine is not functioning properly. This can cause faults that can result in eventual or
immediate death, serious injury, or material damage.
Inform maintenance personnel immediately. If in doubt, shut down the motor immediately,
taking into account the plant-specific safety regulations.
Danger of burns
The temperature of certain parts of the motor can exceed 65 °C. Physical contact with the
machine could cause serious burns.
Check the temperature of the parts before touching them and take appropriate protective
measures if necessary.
SIMOTICS A-1FV5/1PV5 synchronous/induction motors
Operating Instructions, 03/2014, 610.45002.40
WARNING
WARNING
CAUTION
8
49