Siemens SIMOTION Function Manual page 51

5. Click Close.
6. Insert a new output cam or a new cam track or use an existing one.
7. Parameterize the TO Output Cam / Cam Track
8. Double-click Configuration below the output cam or the cam track in the project navigator.
9. For high-speed, hardware-supported output cams, you can achieve an output accuracy
10.Assignment of an output to an output cam/cam track is supported as of V4.2 either by
11.Click OK to close the window and select Project > Save from the menu.
Output Cams and Measuring Inputs
Function Manual, 04/2014
The Configuration window appears in the working area.
exceeding the servo cycle clock based on the hardware used. Should you wish to configure
a high-speed output cam, select the Activate output checkbox and select the Output cam
output (CAM) radio button.
symbolic assignment (see Chapter Symbolic Assignment (as of V4.2) in the SIMOTION
Runtime Basic Functions manual) or by entering the hardware address.
3.3 Configuring the Output Cam technology object
Output Cam TO - Part I
51