Siemens SIMOTION Function Manual page 173

Channels 0-7
Figure 5-21 Channels 0-7
Table 5-10 Channels 0-7
Function
IN/OUT X142
Inverter
Function
DI
DO
Output cam
Measuring input
IN filter time
Filter time
Set substitute value/keep last value
Logical address
Output Cams and Measuring Inputs
Function Manual, 04/2014
5.3 Configuring the Measuring Input technology object
Description
Inputs/outputs (IN/OUT 0-7) of X142.
Button for inverting.
Digital input.
Digital output.
Cam output.
Measuring input input.
The drop down list contains 1µs and 125µs values. Only
available for DI and measuring input function.
The selection options are available for the DO and output cam
function.
PI, PQ for output cam and measuring input.
Note:
Logical address is only required if you work without symbolic
assignment.
Measuring Input TO - Part III
173