Output Cam TO - Part I
3.2 Output cam TO basics
or
1. In the project navigator, open the Configuration under the TO.
2. Select the Units tab.
You can set the following parameters:
Field/button
Table with units
Physical variable column
Unit column
Toolbar
Close
Help
36
Meaning/instruction
Shows the physical variable. The physical variables which
are used by the TO are available for the configuration.
Displays and configures the unit. A drop-down list for
selecting the unit appears when you click on the cell.
Displays whether offline data or online data is shown
● Blue field = offline display
● Yellow field = online display
Button for closing the dialog.
Button for opening the online help for the dialog.
Output Cams and Measuring Inputs
Function Manual, 04/2014