Siemens SIMOTION Function Manual page 172

Measuring Input TO - Part III
5.3 Configuring the Measuring Input technology object
Addresses
Figure 5-20 Manage addresses
Table 5-9 Addresses
Function
Inputs
Start
Length
System specification
Outputs
Start
Length
System specification
172
Description
Under Start, enter the start address of the digital inputs.
Addresses >= 64 outside the process image are valid.
The length of the digital input address cannot be modified.
With System specification, you can activate or deactivate the
automatic setting of digital input addresses.
Under Start, you can enter the start address of the digital
outputs. Addresses >= 64 outside the process image are
valid.
The length of the digital output address cannot be modified.
With System specification, you can activate or deactivate the
automatic setting of digital output addresses.
Output Cams and Measuring Inputs
Function Manual, 04/2014