Avaya Converged Platform 130 Series Installing Manual page 47

Before you begin
Validate that the Services port group has not been created and configured or that another
application has not configured the vSwitch1 for their product implementation.
• Log in to the vSphere Web Client for the ESXi Host.
• Go to Networking > Port Groups.
• Validate that there is not a Services port group created or that another application has not
already assigned to vSwitch1 for their product deployment.
- If Services port and vSwitch1 has not been created, follow the procedure below to create
it.
- If the Services port is configured, then there is no need to run the script to configure the
Services port. If the vSwitch1 has been created for another use besides a Services port,
contact Avaya Support for configuration of the Services port if needed. Do not run the
script and overwrite the existing vSwitch1 arrangement.
Important:
Running the script will overwrite the current services port group or vSwitch1 if it is configured.
Procedure
1. Copy file ACP130srvprt-cfg.sh to the Avaya Converged Platform 130 ESXi 6.5
directory /bin.
2. Use WinSCP from a Windows machine or scp from a Linux machine for copying file to
ESXi host.
Using WinSCP
Using Linux SCP
October 2019 Installing the Avaya Converged Platform 130 Series
Comments on this document? infodev@avaya.com
Dell R640 XL ESXi Configuration
47