Avaya Converged Platform 130 Series Installing Manual page 54

Configuration
Related links
Management of the TLS protocol configuration for vSphere 6.5 U2 Environment
Configuring TLS v1.2 only for vCenter Server Appliance and Platform
Services Controller Appliance
About this task
Use the following procedure to disable TLS v1.0 and TLS v1.1 and enable v1.2 only for the
vCenter Server Appliance and Platform Services Controller Appliance.
Before you begin
• Create a snapshot of the vCenter Server Appliance virtual machine before performing this
procedure.
• The vCenter Server Appliance must be rebooted when all tasks in the procedure have been
completed. Ensure this procedure is performed in a maintenance window where the
temporary unavailability of the VCSA instance will not impact service.
Procedure
1. Open an SSH session into the vCenter Server Appliance.
2. Enable Bash shell by typing shell in the command line.
3. Run the following command to change to the following directory:
cd /usr/lib/vmware-vSphereTlsReconfigurator/VcTlsReconfigurator
4. To disable TLSv1.0 and TLS v1.1 and enable only TLSv1.2, execute the following
command:
./reconfigureVc update -p TLSv1.2
Note:
It will provide a message stating that the vCenter Server is going to be restarted. Type
Y to continue.
October 2019 Installing the Avaya Converged Platform 130 Series
Comments on this document? infodev@avaya.com
on page 52
54