Juniper MX960 Quick Start Manual page 26

MX960 Ethernet Services Router Quick Start
Table 2: Technical Documentation for Supported Routing Platforms (continued)
Book
JUNOScope Release Notes
AIS Release Notes
AIS AI Script Release Notes
J-series Services Router Release Notes
Table 3: JUNOS Software Network Operations Guides
Book
Baseline
Interfaces
MPLS
MPLS Log Reference
MPLS Fast Reroute
Hardware
To configure and operate a J-series Services Router running JUNOS software with
enhanced services, you must also use the configuration statements and operational
26
List of Technical Publications
Description
Contain corrections and updates to the published JUNOScope
manual, provide information that might have been omitted from
the manual, and describe upgrade and downgrade procedures.
Summarize AIS new features and guidelines, identify known and
resolved problems, provide information that might have been
omitted from the manuals, and provide initial setup, upgrade, and
downgrade procedures.
Summarize AI Scripts new features, identify known and resolved
problems, provide information that might have been omitted from
the manuals, and provide instructions for automatic and manual
installation, including deleting and rolling back.
Briefly describe Services Router features, identify known hardware
problems, and provide upgrade and downgrade instructions.
Description
Describes the most basic tasks for running a network using Juniper
Networks products. Tasks include upgrading and reinstalling JUNOS
software, gathering basic system management information,
verifying your network topology, and searching log messages.
Describes tasks for monitoring interfaces. Tasks include using
loopback testing and locating alarms.
Describes tasks for configuring, monitoring, and troubleshooting
an example MPLS network. Tasks include verifying the correct
configuration of the MPLS and RSVP protocols, displaying the status
and statistics of MPLS running on all routing platforms in the
network, and using the layered MPLS troubleshooting model to
investigate problems with an MPLS network.
Describes MPLS status and error messages that appear in the output
of the show mpls lsp extensive
how and when to configure Constrained Shortest Path First (CSPF)
and RSVP trace options, and how to examine a CSPF or RSVP
failure in a sample network.
Describes operational information helpful in monitoring and
troubleshooting an MPLS network configured with fast reroute
(FRR) and load balancing.
Describes tasks for monitoring M-series and T-series routing
platforms.
command. The guide also describes