Fluke Expert Series User Manual page 8

TiX500, TiX520, TiX560, TiX580
Users Manual
Do not look directly into the laser with optical tools (for example,
•
binoculars, telescopes, microscopes). Optical tools can focus the
laser and be dangerous to the eye.
Do not open the Product. The laser beam is dangerous to eyes.
•
Have the Product repaired only through an approved technical
site.
Do not use laser viewing glasses as laser protection glasses.
•
Laser viewing glasses are used only for better visibility of the
laser in bright light.
Additional laser warning information is on the inside of the Product swivel. See Figure 1.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
Storage and/or continual operation of the Imager in extreme
ambient temperature conditions can result in temporary
interruption of operation. If this occurs, let the Imager stabilize
(cool down or warm up) before you resume operation.
4
Shop for Fluke products online at:
RAYONNEMENT LASER NE PAS REGARDER
DANS LE FAISCEAU APPAREIL LASER DE
CLASSE 2
LASER RADIATION DO NOT STARE
INTO BEAM CLASS 2 LASER PRODUCT
21 CFR 1040.10,1040.11
COMPLIES WITH IEC/EN 60825-1:2007
675nm
Figure 1. Laser Warning
 Caution
MyFlukeStore
www.
1.888.610.7664
.com