Wireless Connectivity - Fluke Expert Series User Manual

TiX500, TiX520, TiX560, TiX580
Users Manual

Wireless Connectivity

The Imager has several wireless connectivity options. Before the first use of the wireless
feature, enable the radio. See Enable the Radio.
Bluetooth
Use Bluetooth to connect the Imager to a device such as a wireless headset. When Bluetooth
is on,  shows in the upper left corner of the display.
To use Bluetooth:
1. Select Camera > Wireless > Bluetooth > On.
2. Push Select to scan for available Bluetooth devices within the range of the camera.
3. Select a device.
4. Push  to connect to or disconnect from the device.
5. If you are prompted, enter a password.
WiFi Hotspot
Use the Imager to create a wireless Hotspot when no WiFi network exists. You can use the
Hotspot to download saved pictures or stream live images from the Imager to a PC with
SmartView software or to a mobile device with the Fluke Connect app. See Stream Live to a
PC and Fluke Connect Wireless System for more information. When WiFi Hotspot is on,
shows in the upper left corner of the display.
WiFi is for indoor use only in Kuwait, Chile, and United Arab Emirates.
To create a Hotspot, select Camera > Wireless > WiFi Hotspot > On.
To change the settings:
1. Select Camera > Wireless > WiFi Hotspot > Off.
2. Select Settings.
3. Select an option:
Name (SSID) to change the SSID
•
Password to turn the password on/off or to change the password
•
Channel to change the channel
•
4. Push  to open a keyboard on the display.
5. Use the keyboard to enter the information for the option.
30
Shop for Fluke products online at:
Note
MyFlukeStore
www.

1.888.610.7664
.com