To set the size of the Spot Box when Spot Box is set to On:
1. Select Measurement > Spot Box > Set Size.
2. Push:
•
to decrease the vertical size of the Spot Box.
•
to increase the vertical size of the Spot Box.
•
to decrease the horizontal size of the Spot Box.
•
to increase the horizontal size of the Spot Box.
When you are satisfied with the size of the Spot Box, push to set the change and exit
the menus or push to set the change and go back to the previous menu.
To set the position of the Spot Box when Spot Box is set to On:
1. Select Measurement > Spot Box > Set Position.
2. Push
3. When you are satisfied with the position of the Spot Box, push to set the change and
exit the menus or push to set the change and go back to the previous menu.
Shop for Fluke products online at:
to move the Spot Box location on the image.
MyFlukeStore
www.
Expert Series Thermal Imagers
1.888.610.7664
.com
Menus
19