Remote Control Of Imager - Fluke Expert Series User Manual

Remote Control of Imager

Use SmartView software on a PC or the Fluke Connect app on a mobile device to remotely
control the Imager.
To remotely control the Imager with a PC:
1. Turn on Remote Display. See Stream Live to a PC.
2. In SmartView software, select SmartView (Camera is the default selection).
When in remote control mode, use the SmartView software to control all the menus on the
Imager. The menus cannot be changed directly on the Imager.
To remotely control the Imager with the Fluke Connect app:
1. Set up the Fluke Connect system. See Fluke Connect Wireless System.
2. On the mobile device, tap on the streaming image.
An option shows to Remote Control the Imager.
3. Select Yes.
From the mobile device, you can change the IR-Fusion setting, select Auto Focus to turn on
LaserSharp Auto Focus, or tap the green Capture button to take an image. You can change
the other menu items on the Imager directly even while the mobile device remotely controls the
Imager.
Shop for Fluke products online at:
MyFlukeStore
www.
Expert Series Thermal Imagers
Remote Control of Imager
1.888.610.7664
.com
43