Fluke Expert Series User Manual page 35

6. Push  to go back.
7. Push  to use the Imager.
WiFi Network
Use the WiFi Network setting to connect the Imager to a WiFi network and to sign into your
Fluke Connect account on the Imager. When WiFi Network is on,
corner of the display.
To turn on the WiFi Network feature:
1. Select Camera > Wireless > WiFi Network > On.
2. Push Select to scan for available networks within range of the Imager.
3. Select a network.
4. Push  to connect to or disconnect from a network.
5. If you are prompted, enter a password.
Sign In
When the Imager is connected to a WiFi network, you can sign into your Fluke Connect
account on the Imager and use Fluke Connect Instant Upload. When you use Fluke Connect
Instant Upload, the images you take with the Imager automatically upload to your Fluke
Connect account in the Fluke Cloud. You can view the images saved in the Fluke Cloud on the
Fluke Connect app or the Fluke Connect website without the mobile device and Imager
connected to each other.
The Instant Upload feature may not work on all networks or with all devices due
to the security profiles on different networks.
To sign in to your Fluke Connect account:
1. Select Camera > Wireless > Sign In to open a keyboard on the display.
2. Use the keyboard to enter your user name.
3. Push .
4. Use the keyboard to enter your password.
5. Push .
shows on the display.
To sign out:
1. Select Camera > Wireless > Sign Out.
2. Push .
Shop for Fluke products online at:
Note
MyFlukeStore
www.
Expert Series Thermal Imagers

shows in the upper left
1.888.610.7664
.com
Menus
31