Delete Image - Fluke Expert Series User Manual

TiX500, TiX520, TiX560, TiX580
Users Manual
Text Notes
Text annotation is only available in the .is2 file format. Text notes are stored with the image so
you do not need to collate multiple files later.
To add a text annotation:
1. With an image in the buffer, push  to open the Edit Image menu.
2. Select Add Text.
3. Push  to open a keyboard on the display.
4. Use the keyboard to input a message.
5. Push  to save the message.
6. Push  when done.
7. Push  to save the message with the image.
To view a text annotation in memory:
1. Open the Memory menu.
2. Select a file to view. All files with text annotations show  with the preview file.
3. Push  to open the Notes menu.
4. Push  to view the text annotation.

Delete Image

To delete images, do the corresponding procedure below for the desired action.
Action
Delete one file
Delete all files
36
Shop for Fluke products online at:
1. Open the Memory menu.
2. Select a preview image.
3. Push  to open the Edit menu to review the file.
4. Select Selected Image.
The Imager displays Edit or Delete.
5. Select Delete.
The Imager prompts you to continue or cancel.
6. Push  again to delete the file.
1. Open the Memory menu.
2. Push  to open the Edit menu to review the file.
3. Select All Images.
The Imager prompts you to continue or cancel.
4. Push  to delete all the files from the memory.
MyFlukeStore
www.
Procedure
.com
1.888.610.7664