Basic Operation; Turn On And Off The Imager - Fluke Ti300U User Manual

Item
e
GPS
Enable/disable the GPS function.
Laser
f
Turn on or off the Laser Pointer/Distance Finder.
When the laser is on, the laser icon is yellow (
on the screen; when the laser is off, the icon is white (
g
Volume Control
h
Brightness Control
To prevent eye damage or personal injury:

Do not look into the laser. Do not point laser directly at persons or animals
or indirectly off reflective surfaces.

Do not disassemble the Product. The laser beam is dangerous to eyes.
Have the Product repaired only through an approved technical site.

Basic Operation

Turn On and Off the Imager

Before you use the Imager for the first time, charge the battery for a minimum of 2 ½ hours. See
Charge Batteries for more information on battery charging.
To turn on or turn off the Imager, push and hold
To maximize the life of the battery, use the Power Save features. See
about how to set these features.
When the Product is turned on, push and hold
the screen. The menu options are:
•
Reboot The Imager will shut down and then restart.
•
Power Off: Turn off the Imager.
•
Cancel: to exit the menu.
Description
), and the laser status indicator (
 Warning
for 2 seconds.
for 2 seconds, the Power menu will pop up on
Thermal Imagers
Basic Operation
).
Settings for more information
) shows
13