Wireless Connectivity - Fluke Ti200 User Manual

3. Touch Record Video to set up the Imager to record a video.
p shows in the upper left corner of the display.
4. Pull and release the Primary Trigger to start recording.
r shows in the upper left corner of the display. The elapsed time shows at the bottom of the
display.
5. Pull and release the Primary Trigger to stop recording.
6. Push  to end the recording session.
7. Push  to save the video file.
View Video
To play a video:
1. Open the Memory menu.
2. Select a file to play. All video files show k in the upper right corner of the thumbnail.
3. Push  to set a file.
4. Push  to start the video. While the video plays, push  or  to fast forward or rewind.
Push  to return to normal speed.
5. Push  to exit the video mode.

Wireless Connectivity

The Imager has several wireless connectivity options.
Before the first use of the wireless feature, enable the radio. See Enable the Radio.
Bluetooth
Use Bluetooth to connect the Imager to a device such as a wireless headset. When Bluetooth is on,
 shows in the upper left corner of the display.
To use Bluetooth:
1. Select Camera > Wireless > Bluetooth > On.
2. Push Select to scan for available Bluetooth devices within the range of the camera.
3. Select a device.
4. Push  to connect to or disconnect from the device.
5. If you are prompted, enter a password.
Note
Thermal Imagers
Menus
23