Canon FAX-L260i Service Manual page 196

FAX-L260i Chapter 3: Maintenance & Service
b) Reports which can be output automatically using user data settings
Each report written below can be automatically output by specifying "REPORT SETTING" in user data.
Transmission report
Reception report
NOTE
c) Reports output automatically
Memory clear list
The fax automatically outputs a memory clear list when the power is turned on after a power cut.
TX/RX NO
MODE
CONNECTION TEL/ID
PGS
SET TIME
START TIME
ROM Version display
The ROM version is printed on the top left hand side of the User's data list. Please refer to
this when troubleshooting.
example:
EC-XX-XX / XX
Printer ROM version
MAIN ROM version
Figure 3-25 Memory Clear List
: Indicates four digits of the transaction number
: Indicates, TRANSMISSION, or MEMORY RX, etc,.
: Number sent from the other party or number dialled
: Number of pages stored in memory
: Time when data was stored in memory
: Planned transmission start time (24-hour display)
EC-XX-XX- G4OP
3-100
G4 ROM version