Canon FAX-L260i Service Manual page 173

ISDN G3 Bitswitch SW01
Bit Function
0 Enforced G3 calling
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit0]
When the main bit is "0," the outgoing call is made with the designated mode, but when the main bit is
"1," it is made with G3 mode as default. For example, even in cases where the outgoing call is made
with one-touch dial and coded dial designated by TX mode "G4," the call will be made with G3 mode.
ISDN G3 Numeric parameter
No. Function
01 Length of outgoing DTMF signal
02 Length of minimum pause for
outgoing DTMF signal
[No.01]
It is possible vary the transmission time of the DTMF signal transmission.
[No.02]
It is possible to vary the minimum pause time of the DTMF signal transmission.
FAX-L260i Chapter 3: Maintenance & Service
1
Yes
Selecting range
10-9999
10-9999
3-77
0
No
Default settings
90 (90msec.)
90 (90msec.)