Canon FAX-L260i Service Manual page 138

FAX-L260i Chapter 3: Maintenance & Service
##1388 [RX] CDCL parameter abnormal
Cause:
Solutions:
##1389 [TX] RDCLP parameter abnormal
Cause:
Solutions:
##1412 [TX] RDGR transmission
Cause:
Solutions:
##1413 [TX/RX] Abnormality discovered before session connection
Cause:
Solutions:
##1414 [TX/RX] Abnormality discovered in the session procedures after session connec-
Cause:
Solutions:
##1417 [TX] Monitoring timer time-out with no response (T.62 T2 timer)
Cause:
Solutions:
##1418 [TX/RX] CSA timer (T.62 T3 timer) time-out
Cause:
Solutions:
Document procedures received, abnormality discovered in CDCL contents
(1) Check whether the other party's machine is working properly.
(2) Re-establish communication.
(3) Output a communications analysis list, and analyze it.
Document procedures received, abnormality discovered in RDCLP contents
(1) Check whether the transmitting machine has been stopped
(2) Re-transmit.
(3) Output a communications analysis list, and analyze it.
RDGR received during document procedures
(1) Re-transmit.
(2) Output a communications analysis list, and analyze it.
Abnormality discovered in the procedures before session connection (below B-chan-
nel layer 4)
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
tion
A frame which could not continue session procedures normally, or an undefined frame
was received after session connection
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
Timed out without getting a response (layer 5 frame reception) from the receiving
side during transmission
(1) Confirm that the receiving machine is operating normally
(2) Re-transmit.
(3) Output a communications analysis list, and analyze it.
CSA received, or timed-out with no RSAP response
(1) Confirm that the other party's machine is operating normally
(2) Re-establish communication.
(3) Output a communications analysis list, and analyze it.
3-42