Canon FAX-L260i Service Manual page 150

FAX-L260i Chapter 3: Maintenance & Service
5.2 Service Data Settings
Service data can be checked and changed with items on display menus. The default values of the SSSW/
parameters available in this fax machine are shown in this Chapter, 5.2.3 Service data settings in this
manual. The SSSW/parameters given in the previous product-specific manual are explained in the G3 Fac-
simile Service Data Handbook . The new switches for this model are described in this Chapter, 5.2.5 New
SSSWs/parameters added to this model.
5.2.1 Service data overview
The service data menu items are divided into the following ten blocks.
#1 SSSW (Service Soft Switch settings)
These setting items are for basic fax service functions such as error management, echo countermeasures,
and communication trouble countermeasures.
#2 MENU (MENU switch settings)
These setting items are for functions required during installation, such as NL equalizer and transmission
levels.
#3 NUMERIC Param. (NUMERIC parameter settings)
These setting items are for inputting numeric parameters such as the various conditions for the FAX/TEL
switching function.
#4A SPECIAL (SPECIAL switch settings)
These setting items are for special functions.
#4B ISDN (ISDN settings)
These settings items are for the purpose of controlling the D-channel protocol and the B-channel protocol.
#5 TYPE (TYPE setting)
The type setting makes the service data conform to a specific nation's communications standards.
#6 GENESIS (UHQ function setting)
These setting items are for scanned image processing functions such as edge enhancement and error diffu-
sion processing.
#7 PRINTER (PRINTER function settings)
These setting items are for basic printer service functions such as the reception picture reduction condi-
tions. Also there is an item for resetting the printer section without switching the power off-on.
#8 CLEAR (data initialization mode)
Various data are initialized by selecting one of these setting items. There is a setting item for checking/inputting the
total number of pages printed and total number of pages scanned by this fax.
#9 ROM (ROM management)
ROM data such as the version number and checksum are displayed.
#10 REPORT (Service report output function)
The service report can be output in three types of forms.
3-54