Canon FAX-L260i Service Manual page 126

FAX-L260i Chapter 3: Maintenance & Service
##1063 [TX/RX] Service or option not available, unspecified.
Cause:
Solutions:
##1065 [TX/RX] Bearer capability not implemented
Cause:
Solutions:
##1066 [TX/RX] Non-supplied channel classification designated
Cause:
Solutions:
##1069 [TX/RX] Channel type not implemented
Cause:
Solutions:
Indicated above
(1) Re-check the designated service contract, and re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-check the designated service contract, and re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-check the designated service contract, and re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-check the designated service contract, and re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
3-30