Canon FAX-L260i Service Manual page 109

4.2.2 Error codes
a) Service error code output
When service data #1 SSSW SW01 bit 0 is set to "1", then service error codes are printed on the activity
management reports, reception result reports and error transmission reports when communication is termi-
nated due to an error. Also, the following is displayed when an error occurs.
Figure 3-3 Service Error Code Display
b) Error code countermeasures
The following item c) lists all the error codes which the unit can display. The separate G3 Facsimile Error
Code List (Rev. 1) does not specify the countermeasures for resolvable error codes. Also refer to this list
when an error code appears.
Methods for countermeasures regarding D-channel error codes and B-channel error codes are mentioned in
item e).
FAX-L260i Chapter 3: Maintenance & Service
TX/RX No. 5001
Display alternates repeatedly
START AGAIN ##106
3-13