Kodak X-Omat 2000 Service Manual page 46

SERVICE MANUAL
BRACKET
[4] Check that the surface of the RESILIENT ROLLER is smooth. Install a replacement if necessary.
[5] Check components for wear or broken parts. Install replacements if necessary:
• SPRINGS
• ROLLER GEARS
• BEARING
• BRACKET
• NUTS
• DRIVE GEAR
[6] Check the CROSSOVER AYs for squareness. Use the procedure on Page 7.
RACK AYs
[1] Remove the RACKS from the PROCESSOR.
[2] Rinse the RACKS with warm water.
[3] Use warm water and a soft BRUSH to clean the RACKS, or use:
46
GUIDE
SHOE
Cleaning Solution
DEVELOPER SYSTEM CLEANER and
NEUTRALIZER, Catalog No. 843 4615
FIXER/WASH SYSTEM CLEANER,
Catalog No. 139 5110
ROLLER
BEARING
RACK
DEVELOPER
FIXER
WASH
ROLLER
GEAR
NUT
SPRING
DRIVE
GEAR
H172_1058BCA
H172_1058BA
12JAN99 – 7C8772