Kodak X-Omat 2000 Service Manual page 37

[6] Apply SEALANT TL-3230 to the THREADS on the new DEVELOPER OVER-TEMPERATURE
THERMOSTAT.
DEVELOPER
THERMISTOR
Caution
You must install the DEVELOPER OVER-TEMPERATURE THERMOSTAT at the correct distance from the
THERMOWELL.
[7] Install the new DEVELOPER OVER-TEMPERATURE THERMOSTAT 5 mm (13/64 in.) from the
THERMOWELL.
[8] Connect the wires of the new DEVELOPER OVER-TEMPERATURE THERMOSTAT to:
• TB4-8
• TB4-9
• TB4-15
• TB4-16
[9] Close the ELECTRICAL BOX.
[10] Fill the DEVELOPER TANK or remove the CLAMPS from the TUBES on the THERMOWELL.
7C8772 – 12JAN99
5 mm
(13/64 in.)
13.9 cm
(5.500 + .060 in.)
−
Adjustments and Replacements
DEVELOPER
OVER-TEMPERATURE
THERMOSTAT
THERMOWELL
H172_1052BCA
H172_1052BA
37