Kodak X-Omat 2000 Service Manual page 33

SETSCREW
Do not
adjust!
LOCKNUT
H172_1029BCA
H172_1029BC
[2] Check to see if the ADJUSTMENT SCREW is visible through the BRACKET HOLE.
[3] If the ADJUSTMENT SCREW is visible, advance to Step 5.
[4] If the ADJUSTMENT SCREW is not visible, operate the REPLENISHMENT PUMP until the ADJUSTMENT
SCREW is visible by lifting the UPPER ROLLER of the DETECTOR CROSSOVER AY.
Caution
Do not adjust the LOCKNUT.
[5] Loosen the SETSCREW.
[6] Rotate the ADJUSTMENT SCREW to change the flow rate:
• clockwise to increase the flow rate.
• counterclockwise to decrease the flow rate.
[7] Tighten the SETSCREW.
[8] Check the Replenishment Rates. See Page 31
[9] If the flow rate is not correct, do Steps 3 - 8 again
7C8772 – 12JAN99
REPLENISHMENT PUMP
ADJUSTMENT
SCREW
Adjustments and Replacements
ADJUSTMENT SCREW
DECREASE
BRACKET
HOLE
UPPER ROLLER
DETECTOR CROSSOVER
ASSEMBLY
2 DETECTOR
SWITCHES
INCREASE
OUTPUT
H172_1006BCA
H172_1006BC
33