Usb Port Board Cable - HP Chromebook x360 11 Maintenance And Service Manual

3. Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WLAN module.

USB port board cable

Description
USB port board cable (high speed)
USB port board cable (low speed)
Before removing the USB port board cables, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the USB port board cables:
WLAN modules are designed with a notch to prevent incorrect insertion.
Keyboard/top cover on page
Battery on page
Spare part number
929338-001
929339-001
18).
26).
Component replacement procedures 29