d.
Disconnect the display panel cable (3) from the display panel.
The display panel is available using spare part number L36473-001.
14.
If it is necessary to replace the G-sensor board:
NOTE:
The G-sensor board can be removed and replaced without removing the display assembly from
the base enclosure.
▲
Detach the G-sensor board from the display panel assembly (1), and then disconnect the cable
from the board (2). (The G-sensor board is attached to the display panel assembly with double-
sided adhesive.)
The G-sensor board is available using spare part number 928081-001.
15.
If it is necessary to remove the top bracket from the display:
NOTE:
You must remove the top bracket to remove the webcam/microphone module and display
hinges/brackets.
Component replacement procedures
41