Usb Port Board Cable - HP Chromebook 14 G5 Maintenance And Service Manual

USB port board cable

NOTE: The USB port board spare part kit does not includes the USB port board cable. The USB port board cable
is included in the Cable Kit, spare part number L14330-001, and includes double-sided adhesive.
Before removing the USB port board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the USB port board cables:
1. Release the three ZIF connectors (1) to which the USB port board cables are connected, and then
disconnect the USB port board cables from the USB port board.
2. Release the two ZIF connectors (2) to which the USB port board cables are connected, and then disconnect
the USB port board cables from the system board.
3. Detach the USB port board cables (3) from the bottom cover. (The USB port board cables are attached to
the bottom cover with double-sided adhesive.)
4. Remove the USB port board cables (4).
Reverse this procedure to install the USB port board cable.
30 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
21).
27).