Usb Port Board - HP Chromebook x360 11 Maintenance And Service Manual

1. Release the ZIF connector (1) to which the USB port cable is connected, and then disconnect the USB
port cable from the USB port board.
2. Release the ZIF connector (2) to which the USB port cable is connected, and then disconnect the USB
port cable from the system board.
3. Release the ZIF connector (3) to which the USB Type-C port cable is connected, and then disconnect the
USB Type-C port cable from the USB port board.
4. Release the ZIF connector (4) to which the USB Type-C port cable is connected, and then disconnect the
USB Type-C port cable from the system board.
5. Remove the USB port board cables.
Reverse this procedure to install the USB port board cables.

USB port board

Description
USB port board (includes USB port, and volume control actuators; does not include cables)
NOTE: The USB port board cable is available using spare number 929338-001 (high speed) and 929339-001 (low speed).
Before removing the USB port board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the USB port board:
30 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
Spare part number
928082-001
18).
26).